MINERVA OMEGA DERBY 310 - Page 41

41
SVT18-010AR rev 00-15-05-18
CLEANING SHEET IN COMPLIANCE WITH HACCP PROCEDURE
To clean it is advisable to use mild detergents and disinfectants that do not contain alkali (e.g. caustic soda), acidic or chlorinated compounds
(e.g. hypochlorite), or organic solvents (e.g. acetone, alcohol, ether).
Do not use abrasive cloths or metal sponges to remove dirt. Compound solutions must not be used.
Before using any product, read the technical sheet and the safety sheet indicated on the pack.
SURFACE PRODUCT PRODUCT TYPE HOW IT WORKS HOW TO APPLY FREQUENCY
Metal
(steel, stainless
steel, anodised
aluminium)
Plastic
(polyethylene)
Metal
(painted)
CLEANING
Neutral or slightly
alkaline detergent
Products made with anionic and non-ionic
surfactants, containing EDTA, sodium
silicate, synergists, suitably diluted in water.
90% biodegradable; with product pH in
water between 9 and 12.
The surfactant dissolves dirt, which is
subsequently rinsed off with water.
Apply the product using a soft sponge or a
nonwoven or microbre cloth.
Leave for 5 minutes and rinse with water.
CLEANING:
at the end of each
shift or according to
company HACCP
frequency
DISINFECTING* Products containing quaternary ammonium
salts suitably diluted in water.
The anti-bacterial action interferes with the
metabolic reactions of proteins and with the
permeability of the cell membranes.
They are incompatible with anionic
surfactants as they become ineffective
when mixed with them.
Do not mix quaternary ammonium
compounds with normal detergents.
Apply or spray the product onto the surface
using a soft sponge or a paper yarn fabric
cloth.
Leave for 5 minutes and rinse with water.
DISINFECTION:
daily
Transparent plastic
(Lexan, Plexiglas)
CLEANING
Neutral or slightly
alkaline detergent
Products containing anionic and non-ionic
surfactants suitably diluted in water.
The surfactant dissolves dirt, which is
subsequently rinsed off with water.
Apply the product using a nonwoven or
microbre cloth.
Leave for 5 minutes and rinse with water.
CLEANING:
at the end of each
shift or according to
company HACCP
frequency
DISINFECTING* Products suitable for plastic, containing
quaternary ammonium salts suitably diluted
in water.
The anti-bacterial action interferes with the
metabolic reactions of proteins and with the
permeability of the cell membranes.
They are incompatible with anionic
surfactants as they become ineffective
when mixed with them.
Do not mix quaternary ammonium
compounds with normal detergents.
Apply the product using a nonwoven or
microbre cloth.
Leave for 5 minutes and rinse with water.
DISINFECTION:
daily
*Remember to read disinfectant product labels thoroughly, particularly checking that the following are stated on the label:
Disinfectant, Medical Surgical Device; Ministry of Health registration no.; the phrase “for use in the food industry”; doses and use times; composition, manufacturer, batch and production
date; warnings on safe use.