Minibar Systems SmartBox - Setting Lock Time after 4 Failed Attempts to Input Open Code; Setting Use of Master Code; Recording Information; Second Screen: Date

SMARTBOX OPERATING MANUAL—JUNE 2009
15
(3) Setting lock time after 4 failed attempts to input open code
Tap 0 – locking time 0 minutes
Tap 1 – locking time 15 minutes
Tap 2 – locking time 30 minutes
(4) Setting use of master code
Tap 2 – master code disabled
Tap 3 – master code enabled
(5) Recording information
Tap 0 – record door opening information
Tap 3 – record door opening/closing information
(6) Setting working mode
Tap 0 – User will enter a personal code and then press the locking key “#” to close the door.
The safe will save the code at the last closing. User will need only press “#” to close the
door next time
Tap 1 – The user will enter their personal code and then press locking key “#” to close the door.
Now you can set a new code while the door is open. This is suitable for hotel use.
Press the confirmation key “#” and the system will proceed to second screen.
B) Second screen: Date
To set current date: dd/mm/yy
0 6 0 2 0 4
(1) (2) (3) (4) (5) (6)
d d m m y y
This indicates the current date is February 6, 2004.
Press the confirmation key “#”, and the system will proceed to third screen
5. Programming Instructions (cont.)