miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 15
3.2.2 Dirac Live Calibration Tools (DLCT) installation
1. Navigate to the Dirac Live folder of the software download and then to the Mac folder.
2. Double-click on the installer zip file to unzip it. It will have a name similar to Dirac Live Calibration Tool for
DDRC-22 1.1.0.8244.mpkg.zip.
3. If you accidentally started DLCT, quit it now. Double-click on the installer to run it. It will have a name
similar to Dirac Live Calibration Tool for DDRC-22 1.1.0.8244.mpkg. We recommend that you accept the
default installation settings.
4. Double-click on the copy.command file to run it. You will need to enter the password for your computer.
The text in the command window should look like this:
mac:~ me$ /Users/me/Downloads/DDRC_24_v1_0_b2/Dirac\ Live/Mac/copy.command ; exit;
logout
[Process completed]
Successful completion of step 4 is important. DLCT must not be running when you do step 4. If it does
not complete properly, Dirac Live Calibration Tool will run but it will not recognize your DDRC-24. If
there are any error messages in the window, quit DLCT and try again.
To Next Page
Loading...
