Minolta EP1085 - Page 243

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-12
[User Mode]
Function No.
Setting (The default is .)
U-7 <Auto Power OFF Disabling>
Select whether to enable or disable the setting of “0: Disabled” for
“Auto Power OFF Timing” available from the User mode.
U-9
✽
For 23 cpm
Copier only
<File Margin>
Select the margin making method in the File Margin mode.
U-10
✽
For 23 cpm
Copier only
<Priority Paper Size/Source>
Select the priority paper size or paper source selected when the
copier is set into the AMS or Manual mode.
Default: 15 (inch areas) / 6 (metric areas)
L: lengthwise; C: crosswise
NOTE
If a paper size or source that does not exist is selected, the 1st Drawer
(20) is automatically selected.
U-12
✽✽
For 18/23 cpm
Copier only
<APS/AMS/Manual Priority>
Select the priority copying mode that is automatically selected when
the Power Switch is turned ON or Panel Reset key is pressed.
[23 cpm Copier]
[18 cpm Copier]
Highlighted
Data 1
Description Disabled Enabled
0
Data 1
Description
File Margin mode when
the original has a file mar-
gin.
File Margin mode when
the original does not have
a file margin.
0
Data Description Data Description
0
1
2
3
4
5
7
A3 (L)
B4 (L)
A4 (L)
B5 (L)
A5 (L)
FLS (L)
A4 (C)
B5 (C)
10
11
12
13
14
20
21
22
23
11” × 17” (L)
11” × 14” (L)
Legal (L)
Letter (L)
5-1/2” × 8-1/2” (L)
Letter (C)
1st Drawer
2nd Drawer
3rd Drawer
4th Drawer
6
15
Data 1 2
Description APS AMS Manual
0
Data 1
Description AMS Manual
2