FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-11
2-4. PAPER TAKE-UP/TRANSPORT SECTIONS
(1) Removal of the Paper Take-Up Unit
1. Remove the Multi Bypass Table. (15/18 cpm
copier: OPTION) See p. D-15. (NO 1 ~ 7)
2. Slide out the 1st and 2nd (23 cpm copier only)
Drawers.
1139D084AA
3. Press the tabs at the two places indicated by the
arrow and, at the same time, remove the cover.
(15/18 cpm copier only)
1142D007AA
4. Remove screws and the Paper Take-Up Unit. (23
cpm copier: four screws/15/18 cpm copier: five
screws)
1151D020AA
1139D086AA
5. Unplug the connectors from the solenoids on the
Paper Take-Up Unit. (23 cpm copier: two connec-
tors/15/18 cpm copier: one connector)
1139D238AA
6. Remove the Rear and Rear Upper covers.
7. Remove the DC Power Supply Unit.
8. Remove the harness from the wiring saddle.
9. Unplug the connectors (23 cpm copier: two con-
nectors/15/18 cpm copier: one connector).
To Next Page
Loading...
