Minolta EP4000 - Page 93

Custom 2in1
5/6
It is possible to store in memory various
settings that are automatically recalled when
the 2-in-1 copy is selected. Functions that
can be set are "Paper," "Zoom," "Margin,"
and "Erase."
•
When a "Paper" size is selected, that size is
automatically selected when the 2-in-1
copy is set. "Auto Paper" is among the
choices of paper size.
The initial setting is "AutoPaper."
•
When a "Zoom" ratio is selected, that ratio
is automatically selected when the 2-in-1
copy is set. "Auto Size" is among the
choices of zoom ratio.
The initial setting is " ×0.707."
•
When a "Margin" setting is made, that
setting is automatically selected when the
2-in-1 copy is set.
The initial setting is no margin.
•
When an "Erase" setting is made, that
setting is automatically selected when the
2-in-1 copy is set.
The initial setting is no erase.
Custom 2in1 Separation
It is possible to store in memory various
settings that are automatically recalled when
the 2-in-1 separation copy is selected.
Functions that can be set are "Paper,"
"Zoom," "Margin," and "Erase."
•
When a "Paper" size is selected, that size is
automatically selected when the 2-in-1
separation copy is set. "Auto Paper" is
among the choices of paper size.
The initial setting is "AutoPaper."
•
When a "Zoom" ratio is selected, that ratio
is automatically selected when the 2-in-1
separation copy is set. "Auto Size" is
among the choices of zoom ratio.
The initial setting is " ×1.414."
•
When a "Margin" setting is made, that
setting is automatically selected when the
2-in-1 separation copy is set.
The initial setting is no margin.
•
When an "Erase" setting is made, that
setting is automatically selected when the
2-in-1 separation copy is set.
The initial setting is no erase.
Custom Book Copy
It is possible to store in memory various
settings that are automatically recalled when
Book copy is selected. Functions that can
be set are "Paper," "Zoom," "Margin," and
"Erase."
•
When a "Paper" size is selected, that size is
automatically selected when Book copy is
set. "Auto Paper" is among the choices of
paper size.
The initial setting is the paper in the 1st
Drawer.
•
When a "Zoom" ratio is selected, that ratio
is automatically selected when Book copy
is set.
The initial setting is " ×1.000."
•
When a "Margin" setting is made, that
setting is automatically selected when
Book copy is set.
The initial setting is no margin.
•
When an "Erase" setting is made, that
setting is automatically selected when
Book copy is set.
The initial setting is no erase.
Special Paper
Set up a drawer for special paper loading.
The initial setting is "Normal" for all
drawers.
See p. 35 for Special Paper Setting.
Chapter 4
Using the User Mode
4. User’s Choice
87