EasyManua.ls Logo

Minolta IIIF - Switching Power on and off; Auto Power off; Low-Power Warning

Minolta IIIF
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SWITCHING
POWER
ON
AND
OFF
To
switch
on
the
Color
Meter
IF,
press
the
POWER
button;
the
values
for
the
last
measurement
will
appear
in
the
display.
(If
the
setting
of
the
measuring-mode
switch,
or
of
the
flash-range
switch
in
CORD
or
NON.C
measuring
mode,
has
been
changed
since
the
last
measurement,
no
values
will
be
displayed.)
The
meter
is
then
ready
to
take
measure-
ments.
To
switch
off
the
meter,
press
the
POWER
button
again.
AUTO
POWER
OFF
To
conserve
power,
the
Color
Meter
IHF
automatically
switches
off
if
you
do
not
take
a
measurement
or
operate
any
of
the
switches
or
buttons
for
four
minutes.
To
switch
the
meter
back
on,
press
the
POWER
button.
The
display
shown
in
the
data
panel
just
before
the
meter
was
switched
off
will
reappear.
*
If
the
setting
of
the
film-type
switch
is
different
from
the
setting
when
the
meter
automatically
switched
off,
the
displayed
values
will
be
those
for
the
new
setting.
"If
the
setting
of
the
measuring-mode
switch,
or
of
the
flash-range
switch
in
CORD
or
NON.C
measuring
mode,
is
different
from
the
setting
when
the
meter
automatically
switched
off,
no
data
will
be
shown
in
the
data
panel
when
the
meter
is
switched
back
on.
LOW-POWER
WARNING
When
the
power
of
the
batteries
becomes
low,
all
displayed
values
and
indications
will
blink.
The
meter’s
batteries
should
then
be
replaced
with
new
ones.

Table of Contents

Related product manuals