Minolta IIIF - Installing Batteries

PREPARATIONS
Power
The Color Meter IIIF is powered by two AA-size 1.5V alkaline-manganese or carbonzinc, or 1.2V
nickel-cadmium batteries.
INSTALLING BATTERIES
Remove the battery-chamber cover by pressing on the cover's
1 ridged portion and Sliding it in the direction of the arrow.
Insert the batteries with the polarities as indicated inside the
battery chamber.
* Do not mix battery types or ages.
3 Replace the battery-chamber cover.
Immediately after the batteries are installed, all of the meter’s displays and indications will
appear for a few seconds, and then the data panel will ER to one of the measurement displays.
Eifel
4.8
=i
H
d
CORD
scc
HAA
|
ER cre
Initial display settings:
Display mode: LB and CC indexes
Measuring mode: According to setting of measuring-mode switch
Memory channel: 0 (no memory channel number displayed)
Flash range”: According to setting of flash-range switch
Shutter speed”: “60” (1/60 second)
“Flash range and shutter speed are not shown in AMBI measuring mode.