Minolta IIIF - Selecting Display Mode

Selecting Display Mode
The Color Meter INF offers three different display modes: LB
index/CC index, LB filter number/CC index, and photographic color
temperature.
To select the desired display mode, press the DISPLAY button. The
display mode will change in the following order each time the DISPLAY
button is pressed.
© LB index LB filter number Photographic
CC index CC index color temperature
* Displayed values will be recalculated and displayed in the new display mode when the display
mode is changed.
DISPLAY MODES
SE
LB index; mired shift value of required light-balancing filter
CC index; nominal value of required color-compensating filter
LB Filter Number and CC Index
Din
FE D IS a Kodak Wratten filter number *
(If two filter numbers are shown, use both filters together)
S E E CC index; nominal value of required color-compensating filter
“For Kodak Wratten filter numbers, “b” indicates B (as in 80B), “d” indicates D (as in 80D), and “E”
indicates EF (as in 81EF).
Photographic Color Temperature
| C33 K pm
Oo | Photographic color temperature * in Kelvins
* Photographic color temperature is determined based on the spectral
|
Leer, a | response of color film. See p. 25 for further information.
10