Minolta IIIF - Specifications

‘SPECIFICATIONS
Type:
Receptor head:
Film-type settings:
Measuring modes:
Measuring range (ISO 100):
Shutter-speed setting range
(for flash measurements):
Display:
Display modes:
Display range:
Analyze function:
Memory function:
Repeatability:
28
Three-color digital color meter for color photograph; determines
filtration required and photographic color temperature of light Sources
Rotating (90° to right/180° to left) receptor head containing three
silicon photocells (filtered to red, green, and blue sensitivities
appropriate for color photography)
D: Daylight film balanced to 5500K
A: Type-A Tungsten film balanced to 3400K
B: Type-B Tungsten film balanced to 3200K
Ambient (AMBI); flash (CORD, NON.C)
Ambient:
Flash:
EV3 to 163
f/2.8 to 180 (in two ranges)
1 to 1/500 sec. in 1-stop increments
Liquid crystal (LCD)
LB index and CC index; LB filter number and CC index; photographic
color temperature
LB index:
CC index:
LB filter number:
Photographic color temperature:
-500 to 500 mireds
200G to 200M
80A+80D to 85B+81EF
1600 to 40,000K
Determines measurement values for only flash light in mixed
flash/ambient situations
9 memory channels for storing correction values to adjust calculated
filtration (LB index and CC index); stored values automatically
added to initially calculated values before display of results
Correction-value range: ALB: -100 to +100 mireds
ACC: 100G to 100M
LB index: 2 mireds
CC index: 2 digits
Photographic color temperature: Corresponding to 2 mireds
(Based on Minolta’s standard test method)