Basic Operation
Powering the Camcorder On and Off
There are two ways to power the camcorder on and off.
1. The camcorder can be powered on or off by flip-opening or flip-closing the
LCD screen. Once flip-opening the LCD screen, allow the camcorder two
seconds for the CPU to initiate.
2. The camcorder can be powered on or off by pressing the power button.
Navigating the Camcorder’s Menus
You may navigate through the menus and user interface utilizing the buttons
and the touch screen. The instructions below will be outlined utilizing the
physical buttons on the camcorder button. All of the menus may also be
accessed by tapping or touching the LCD screen as well.
To Next Page
Loading...
