minrray UV950A - Focus, Noise Reduction, and P;T;Z Settings

24
3.4 FOCUS
Move the pointer to the (FOCUS) in the CAMERA Menu, click the【HOME】and enter the (FOCUS) as follow,
Focus mode： options： auto，manual
AF-Zone： options：up、middle、down
AF-Sensitivity： options： high、middle、low
3.5 NOISE REDUCTION
Move the pointer to the (NOISE REDUCTION) in the CAMERA Menu, click the【HOME】and enter the (NOISE
REDUCTION) as follow,
2D NOISE REDUCTION： Options：auto、close、1~7
3D NOISE REDUCTION： options：close、1~8
Dynamic Hot Pixel： OPTIONS：close、1~5
4. P/T/Z
Move the pointer to the (P/T/Z) in the Main Menu, click the【HOME】and enter the (P/T/Z) as follow,
Speed by Zoom： Only effective for remote controller，On（when zoom in, the PT speed for controller to Pan
tilt device will become slow）、Off
FOCUS
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Focus Auto
AF-Zone Center
AF-Sensitivity Low
[↑↓]Select [← →]Change value
[Menu]Back
NOISE REDUCTION
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
NR-2D Auto
NR-3D 3
Dynamic Hot Pixel OFF
[↑↓]Select [← →]Change value
[Menu]Back
P/T/Z
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Speed by zoom ON
Zoom speed 8
Image Freezing OFF
Acc Curve Fast
[↑↓]Select [← →]Change value
[Menu]Back