pan/tilt will be set to 0 or 1 (1 or 2) number Preset (off by default, preset 1, preset 2)。
Installation: Set the device installation (default is up, down for optional)。
Depth of field: Set depth of field, (default on, off optional). When it is on, camera zooming in, speed slowing
down.
Remote control speed: Set the remote control rotational speed (default 10,1-12 optional)。
Zoom Speed: Set the remote control camera zoom speed (default 8,1-8 optional)。
Serial minimum speed: Set the minimum starting speed of serial command (default 1,1-16 optional)。
Cruising speed: Set cruising speed of camera rotation (default 8,1-16 optional)。
Image Freeze: Set whether to open the image freeze function(off by default)。
Click on the "Save" button to display the "Save successfully" message, then the set is to take effect
4.5.2 System parameters
Serial Protocol: Set the serial port protocol (default automatically, PLC-D, PLC-P, VISCA optional)。
VISCA Address: Set VISCA address (default 1,1-8 optional)。
PLC-D Address: Set Pelco-D addresses (default 1,1-255 (0-255) optional)。
PLC-P Address: Set Pelco-P addresses (default 1,0-255 (1-255) optional)。
Serial networking mode: set the serial networking mode ( default series connection, parallel for optional)。
Lock Address: Set the lock address (default 0,0-255 optional) (default OFF, ON for optional)。
Baud Rate: Set the baud rate (default 9600,2400,4800,115200 optional)。
Click on the "Save" button to display the "Save successfully" message, then the set is to take effect.
4.6 Internet access configuration
4.6.1 ONVIF docking parameters
Switch: Open or close ONVIF docking。
4.7 System Configuration
4.7.1 System Properties
Device Name: Set the device name (the default Conf Camera)。
Device ID: Set the device ID (default 1, Read-Only)。
System Language: Set the system language (default Simplified Chinese, English optional)。
Click on the "Save" button to display the "Save successfully" message, then the set is to take effect.。
4.7.2 System Time
Date Format: Set the date format (YYYY-MM-DD default That year - month - day, MM-DD-YYYY namely
Month - Day - Year, DD-MM-YYYY date - month - year Optional)。
Date separator: set the date separator (default '/','.','-' Optional)。
Time Zone: Set the time zone (default East eight districts, other time zones optional)。
Time Type: Set the time types (default 24 hours, optional 12 hours)。
Time setting: Set time mode (to choose the computer time synchronization,NTP server time synchronization, or
set manually)。
Computer Time: Set the computer synchronization valid。
Update interval: Set the NTP server automatic updated time interval。Valid after setting NTP server
synchronization (default one day, 2-10 days Optional)。
NTP server address or domain name: Set NTP server address or domain name (default time.nits.gov). Valid after
setting NTP server synchronization.
NTP Server Port: Sets the NTP server port (default 123)。Valid after setting NTP server synchronization.
Set the time manually, Effective when set manually.
Click on the "Save" button to display the "Save successfully" message, then the set is to take effect.
4.7.3 User Management
Select users: Set the user type (the default administrator, Common User 1, Common User 2
optional)
User name: set the user name by user type (default admin)。
Password: Set a password (default admin)。
Password confirmation: Confirm the input passwords are the same or not。
Click on the "Save" button to display the "Save successfully" message, then the set is to take effect.（Note: The
user name and password must be a 1-64 character string consisting of alphabets,numbers, underscore or (.) pls note the
case-sensitivity）。
4.6.4 Version upgrade
Click "Browse ..." installation, to select the upgrade file in the pop-up window。
Click on the "Upgrade" button, the upgrade dialog will appear. the device will reboot automatically after update
successfully. (Note: make sure the power and network is keeping connected during the process.or the upgrade will fail)
To Next Page
Loading...
