Video size：set resolution，then device will restart automatically（Main stream default 1920*1080,1280*720 optional，
Secondary stream default 640 * 320, 320 * 180,1280 * 720 optional）。
Stream Rate control：Set rate control mode，then device will restart automatically（Primary / secondary stream
default variable bit rate,fixed rate is for option）。
Image quality：Set image quality（default for Primary stream is better image，secondary stream default is bad
image. Best, better, good, bad, worse, worst for optional）。
Rate (Kb / s): Set the video bit rate (main stream default 4096Kb / s, 64-12288Kb / s optional; secondary stream
default 1024Kb / s, 64-2048Kb / s optional)。
Frame rate (F / S): Set the video frame rate (primary / secondary stream default 25F / S, 5-30F / S optional)。
Keyframe interval: Set the key frame interval (primary / secondary stream default 75F, 1-200F optional)。
Click on the "Save" button to display the "Save successful" message, then set is to take effect。
4.3.2 Flow Post
Switch: To turn on or off the main / secondary stream。
Protocol: primary / secondary stream are both use rtmp protocol。
Host Port: server port number (default 1935,0-65535 optional)
Host Address: server ip addresses (default 192.168.5.11)
Flow Name: choose a different stream name (live / av0, live / av1 optional)。
User: Set the user name。
Password: Set the password。
4.3.3 Video Parameters
Focus：
Focus Mode: set the focus mode (the default auto/manual)。
Focus range: set the focus range (the default middle, the upper and lower optional)。
Focus Sensitivity: Set the focus sensitivity (default is low, high, medium optional)。
Exposure：
Exposure Mode: Set the exposure mode (the default automatic, manual, shutter priority, aperture priority,
Brightness priority optional)
Exposure compensation: Exposure compensation setting is active when it is auto status (default is off)。
Exposure compensation value: Set the exposure compensation value, valid when it is set for auto(default 0,
-7 to 7 optional)。
BLC: Set back light compensation, valid when it is auto status (default is off)。
Anti-flicker: Set up anti-flicker mode, valid when status of automatic, aperture or brightness priority
(default 50Hz, closed, 60Hz optional)。
Gain limit: set the gain limits, auto, active when it is status of aperture or brightness priority(default 7,0-15
optional).
Dynamic range: set the dynamic range (default 3,0-8 optional)。
Shutter speed: active when it is status of manual or shutter-priority (default 1 / 90, 1 / 90,1 / 100,1 / 1/120 /
180,1 / 250,1 / 350,1 / 500,1 / 725 1 / 1000,1 / 1500,1 / 2000,1 / 3000,1 / 1/4000 / 6000,1 / 10000 optional).
Aperture value: Set the aperture value, active when it is status of manual or aperture-priority(default F1.8,
closed, F9.6, F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2 .8, F2.4, F2.0, F1.8 optional).
Brightness: Set the brightness value, active when it is atatus of brightness priority (default 7,0-23 optional)。
Color：
White balance modes: Set the white balance mode (the default automatic, manual, indoor, outdoor
optional)。
Red Gain: Set the red gain, effective when it is manual (default 226,0-255 optional)。
Blue Gain: Sets the Blue gain, effective when it is manual (default 188,0-255 optional)。
Red trim: Fine-tune red gain, valid when it is auto status (default 10,0-20 optional)。
Blue trim: trim blue gain, valid when it is auto status (default 10,0-20 optional)。
Saturation: Set the saturation (default 100%, 60%, 70%, 80%, 90%, 100%, 110%, 120%, 130%, 140%,
150%, 160%, 170%, 180%, 190%, 200% optional)。
Color: Set the chroma (default 7,0-14 optional)。
Filters: Set filter (default 0,1,2,3 optional)。
Auto white balance Sensitivity: Sensitivity Auto white balance settings (default is low, high, medium
optional)。
Image：
Brightness: Set the brightness (default 6,0-14 optional)。
Contrast: set the contrast (default 8,0-14 optional)。
To Next Page
Loading...
