Sharpness: Sets the sharpness value (default 1,0-15 optional)。
Black and white mode: Set black and white mode (default off)。
Gamma: Gamma value setting (default, 0.45,0.5,0.56,0.63 optional)。
Flip Horizontal: Set Flip Horizontal。
Flip Vertical: Set vertical flip。
Noise Reduction：
2D Noise Reduction: 2D noise reduction level is set (the default Auto, 0-5 optional, automatic, 0 to
disable)。
3D Noise Reduction: Set 3D noise reduction level (3,0-8 optional default, 0 is off)。
Dynamic dead pixel correction: Set Dynamic dead pixel correction (default 0,0-5 optional, 0 to disable)。
Note: the value change of the video parameters will be valid automatically, no need to save
4.3.4 character-overlapping
Display date and time: Set whether to display the time and date (default display)。
Show Title: Set whether to display the title (default display)。
Title Content: Set title content (default empty)。
Time font color: Set the time and date font color (default yellow, black, white, red, blue optional)。
Title font color: set the title font color (default white, black, yellow, red, blue optional)。
Moving characters: Set the date and time display position and title, click on the "up, down, left, right" buttons to
move the corresponding character position。
Click on the "Save" button and display the "Save successful" message, then valid。
4.3.5 Character Size
Character size: Set the character size, the device will restart automatically after changed (main
stream default is 24 , secondary stream default is 16,24,16 for option)
Click on the "Save" button to display the "Save successful" message, then valid。
4.3.6 Video output
Output Format: Set the video output format (default
1080P60,1080P50,1080P30,1080P25,1080I60,1080I50,720P60,720P50 optional)。
Click on the "Save" button to display the "Save successful" message, then valid。
4.4 Network Configuration
4.4.1 Basic parameters
Data port: set the data port, the device will restart automatically after changed(default 3000,0-65535 optional)。
Web Port: Set Web port, the device will restart automatically after changed (default is 80,0-65535 is optional)。
Onvif Port: Set Onvif port, the device will restart automatically after changed(default 2000,0-65535 optional)。
Soap Port: Set Soap port (default 1936,0-65535 optional)。
Rtmp Port: Set Rtmp port (default 1935,0-65535 optional)。
Rtsp Port: Set Rtsp port, the device will restart automatically after changed (default 554,0-65535 optional)。
Visca Port: Set Visca port, the device will restart automatically after changed (default 3001,0-65535 optional)。
Click on the "Save" button to display the "Save successful" message, then valid.
4.4.2 Ethernet parameters
DHCP: Set whether to open to obtain IP automatically. The machine will restart automatically
after change(off by default)
IP Address: Set the IP address, the device will restart automatically after changes (default 192.168.5.163)。
Subnet Mask: Set the subnet mask (default 255.255.5.0)。
Default Gateway: Set the default gateway (default 0.0.0.0)。
Physical Address: Set the physical address (the parameter is read-only but can not be modified)。
Click on the "Save" button to display the "Save successfully" message, then the set is to take effect (Note: To
prevent IP conflicts When modify )。
4.4.3 DNS parameters
Preferred DNS server: set the preferred DNS server. (Default 0.0.0.0)。
Alternate DNS server: Alternate DNS server settings. (Default 0.0.0.0)。
Click on the "Save" button to display the "Save successfully" message, then the set is to take effect.
4.5 Pan/tilt configuration
4.5.1 Basic parameters
Power-on mode: Set the power mode. If the power on mode is on and saved to 0 or 1 (1 or 2) number Preset, the
To Next Page
Loading...
