Minuteman X17 - Operating Instructions; Filling the X17 CFS Solution Tank

24
© 2015 Minuteman International, Inc.
X17 ECO CFS Carpet Extractor #988751UM Rev. * 04/15
Filling the X17 CFS
1. Remove clear solution cover lid from front of machine, or
use the supplied faucet ll hose (B), by pulling hose out
and holding rubber inlet against faucet.
2. Fill solution tank with desired amount of warm water.
- MAX water temperature is 120˚F / 50˚C (Ref. C). See
Decal 17262197 below.
- DO NOT add Chemicals or Detergents; WATER ONLY
when lling the X17 CFS solution tank (Ref. A). See
Decal 715474 below. Adding chemicals or detergents will
prematurely reduce the life of the CFS system.
Decal
17262197
Operating Instructions
Operating Instructions
Figure 1
Decal
715474