Minuteman X17 - Troubleshooting Guide

26
© 2015 Minuteman International, Inc.
X17 ECO CFS Carpet Extractor #988751UM Rev. * 04/15
Problem Possible Cause Remedy
Machine does not funcon
Power cord may be disconnected at the
twist lock or wall outlet.
Check connecons and reconnect if
necessary.
Wall outlet breaker may have tripped. Reset breaker.
No water dispensed from spray jets
Circuit breaker in handle tripped. Reset breaker.
Soluon tank in-line lter valve may be
closed.
Open valve.
Sprayjet Switch is in OFF (O) or AUX (II)
posion.
Flip sprayjet switch to ON (I) posion.
No water in soluon tank. Fill soluon tank.
Spray intermient or streaked
Soluon hoses may be clogged or kinked.
Check hose for clogs, remove any debris if
found. Replace kinked hose if found.
Soluon tank in-line lter valve may be
clogged.
Clean strainer thoroughly.
The spray jets may be clogged.
Remove the spray ps and clean as
required. Do not clean out the hole in
the jet with a pin or wire. This may cause
permanent damage.
Troubleshooting
Troubleshooting Guide
Caution! Unplug power cord before sevicing machine component.