HHow do I start or end a FUSE workout?ow do I start or end a FUSE workout?
Last updated: 2016-12-16T00:48:34.000Z | Online Version
Starting a Workout
Find your heart rate by touching and holding the heart rate/timer touchpoint A.
The display will show FIND while FUSE searches for your heart rate. Keep your arm still until your heart
rate is displayed.
Note: Wash Mio FUSE regularly with mild soap and water. Make sure to allow both your arm and FUSE to
dry completely before resuming wear.
3. Recording your Workout
Start: Once your heart rate is showing, tap the heart rate/timer touchpoint A to start the workout timer.
When the display shows “GO”, your workout is being recorded.
Scroll: Tap the scroll touchpoints B and C to scroll through workout metrics.
Pause: Touch and hold the heart rate/timer touchpoint A to pause the timer. Tap it again to resume.
End Workout: Pause your workout (see above), then touch and hold the heart rate/timer touchpoint A to
end your workout.
WWhy are the keys on my FUSE not alwayshy are the keys on my FUSE not always
To Next Page
Loading...
