21
MAINTENANCE
Electrical supply is turned
off at the mains.
Remove the four screws
and the Cover.
Turn water supply fully
off.
Filter - Cleaning/Renewing
Read the section 'Important Safety Information' rst.
1. 2. 3.
Press down on the lter cover and turn
anti-clockwise to release.
Remove the lter cover and lter.
Clean the lter and wipe the inside of the
lter housing to remove any debris.
Replace the lter ensuring it is located over
the pins in the lter body.
Ret in reverse order, making sure that the
O-ring is correctly seated.
4.
Spray Plate Assembly - External
1. Use your thumb or a soft cloth to
wipe any limescale from the soft
nozzles and the front surface of the
showerhead spray plate.
Important! The Showerhead must
be de-scaled regularly to make sure
that the spray plates do not become
blocked.
Cleaning
Many household cleaners contain abrasives and chemical substances, and should
not be used for cleaning plated or plastic ttings. These nishes should be cleaned
with a mild washing up detergent or soap solution, and then wiped dry using a soft
cloth.
To Next Page
Loading...
Need help?
General
