MIRCOM TELEPHONE ENTRY SYSTEM
(NSL SYSTEM)
RESIDENT OPERATING INSTRUCTIONS
Mircom's state-of-the-art door entry system has been installed in this building
to provide you and your guest with an increased level of confidence and
security.
The system operates with your existing telephone. Your guest simply dials
your code number or selects your name by scrolling through the electronic
directory on the lobby panel and your telephone will ring. When answered, you
will be in communication with your guest.
To unlock the main door, dial the digit " 9 " from your telephone.
To refuse entry, simply hang up.
CALL WAITING FEATURE
While engaged in a conversation with the outside line, a distinct tone will be
heard when a visitor places a call. Flash the hook switch to answer the call.
This action will automatically put the outside line "on hold". While on-line, you
can open the main door by dialing the digit " 9 " or flash the hook switch to
refuse entry. Both actions will automatically reconnect you to the previously
"on hold" caller to continue your conversation.
In a similar manner, you can answer your outside caller while talking to the
guest in the lobby. Please note that you can not put your guest "on hold" due
to a system allowable talk-time limit (normally 60 seconds).
KEYLESS ENTRY CODES
To unlock the front door without calling the suite, enter the digit zero and then
the keyless code XXXX. The last four digits are confidentially assigned to
each tenant.
To Next Page
Loading...
Need help?
General