EasyManua.ls Logo

MITECH MICRO 8 - Microwave Device Pages from 10 to

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MICRO 8
Installation and user manual
Page 20 of 24
Warnings
1. When preparing the device and during its use, observe the current technical safety standards
for electrical installations.
2. For standard installations recommended by the manufacturer with antennas positioned at
80/90 cm from the ground, the maximum height of the snowpack or grass must not exceed
the limit of 30 cm beyond which the device may not report any movement / intrusion to its
indoor.
3. Avoid creating interference due to incorrect pointing of multiple TX antennas towards the
same RX antenna.
4. Use shielded cables.
5. Supply the device with a stabilized voltage of 13.8
Vdc.
6. Installation must be carried out by qualified personnel.
7. MITECH is not responsible for damages and / or malfunctions of the barriers caused by
incorrect installation and / or improper use of the same.