Mitel 112 Quick Reference Guide

QUICK REFERENCE GUIDE
© Copyright 2015, Mitel Networks Corporation. All Rights Reserved.
The Mitel word and logo are trademarks of Mitel Networks Corporation.
Any reference to third party trademarks are for reference only and Mitel makes no representation of the ownership of these marks.
QUICK REFERENCE GUIDE
Transfer a Call - Unsupervised
• While on a call, press TRANSFER. The current call is placed on hold.
• Dial the extension of the transfer destination.
• Press TRANSFER.
Transfer a Call - Supervised
• While on a call, press TRANSFER. The current call is placed on hold.
• Dial the extension of the transfer destination.
• Press .
• Wait until the called party answers, announce the transfer.
• Press TRANSFER.
Check Calls
• From idle mode, press .
• Select CALLS.
• Select the call (missed, incoming, and outgoing calls are listed).
• Select VIEW to see call details.
Do Not Disturb
Do Not Disturb (DND) stops calls from ringing your handset. DND returns busy tone to the caller. DND does
not affect your ability to make calls.
• Press to enter the main menu.
• Select SETTINGS.
• Press SELECT.
• Select DO NOT DISTURB.
• Press SELECT.
• Select ENABLED or DISABLED
• Press SELECT.
About Feature Access Codes
You can dial codes to activate Call Forwarding features and Do Not Disturb. The feature access codes
provided in this guide are the default system codes.Your system may be programmed with different codes.
Contact your System Administrator to obtain the codes assigned for your system.
Note that when your handset is programmed in a personal ring group (that is, twinned to your desktop
phone) Call Forwarding feature access codes are not supported from your handset.Forward a Call
Note that when call forwarding active, there is nothing on the handset that indicates it is enabled. To
program and activate Call Forward:
•Press .
• Dial the appropriate Call Forward Feature Access code followed by the destination number. Note that
the following are default codes. Your system may use different codes. Contact your System
Administrator for a list.
-Always: ∗64
-Busy: ∗61
-No Answer: ∗68
•Press .
To cancel Call Forwarding:
•Press .
• Dial the Cancel All Forwarding code (Default ∗70)
•Press .

Mitel 112 Specifications

General

Protocols	SIP
Lines	2
Headset Port	Yes
Volume Controls	Yes
Speakerphone	Yes
Wall Mountable	Yes
Ethernet Ports	2 x 10/100 Mbps
Power	PoE