Before You Begin
Release 3.3 3
Before You Begin
Printing the Hardware User Guide
You can access a printable version of the Hardware User Guide from the System Administration
Tool Help and from our web site.
Go to section What's New in this Release? to find a list of changes to software and hardware
from one product version to the next.
What's New in this Release?
3300 ICP Release 3.3:
• New 3300 - 100 user chassis and configurations
• Geographic expansion. See Loss Level and Tone Plans
• Updates to IP-TDM G.729 compression
• Upgrading 250/700 User systems to 30 Voice Mail ports
• New Software Upgrade procedure.
3300 ICP Release 3.2:
• Single software build: select your country to set the appropriate language, dialing plan,
tone plan, and loss & level plan.
• IP-TDM (E2T) G.729 compression
• Optimized system performance: 300 MHz E2T and RTC
• Symbol wireless telephones
• 3300 ICP as a Stand-alone Wireless Gateway
• 3300 ICP as a Stand-alone Voice Mail
• Range programming to simplify the addition, change, or deletion of repetitive or
incremental values
• Telephone power options
• Personal and Corporate Directories on the 5140 IP Appliance
• System Hardware Profile to view information about installed hardware
• Controller upgrade options for capacity, version, and/or compression
• ASU and Universal ASU to support the European market
Note: You must have Adobe Acrobat
®
Reader to view and print the Hardware User Guide.
If you need a copy of Adobe Acrobat Reader, it is available for download at
http://www.adobe.com/acrobat.
To Next Page
