9
English
LCD
• If the liquid crystal display breaks, avoid injury by
not allowing the liquid crystal to come into
contact with eyes, skin or mouth. Prevent the
liquid crystal from leaking out of the broken
glass.
Preventing malfunction
• Never place the equipment in close proximity
of electric motors, welding equipment or other
devices generating strong (electro) magnetic
fields. Exposure to strong (electro) magnetic
fields may cause malfunction and corrupt the
communication.
• Moving the equipment rapidly between warm
and cold temperatures may cause condensation
(water droplets) to form on its internal and
external surfaces. Water droplets may cause
malfunction of the equipment and corrupt or end
communication or damage the equipment. When
condensation is noticed, stop using the
equipment. Switch off the phone, remove the
battery and unplug the mains adapter from the
power outlet. Wait until the moisture evaporates
from the equipment before putting it in operation
again.
• Avoid accidental drop of the phone. Use the clip,
security clip or carrying case specified for
carrying purposes of the phone.
• Avoid squeezing the phone between furniture
and your body when carrying the phone in your
pocket or attached to clothing.
Notice to European customers:
• The CE marking affixed to Mitel products
indicates conformance to the RED 2014/53/EU
(Radio and Telecommunications Terminal
Equipment Directive).
• For a copy of the original signed Declaration (in
full conformance with EN45014), please contact
your Mitel office or Sales partner.
• For more information on:
http://www.mitel.com
MITEL 5613 CORDLESS_QRG_MX-ONE.book Page 9 Thursday, March 1, 2018 2:52 PM
To Next Page
Loading...
