Mitel 622 DECT User Manual

62 Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Supplementary features
There is no time limit to the duration of a verification call, which must be terminated on the
destination phone or on the monitoring handset. Once the call has been cleared down,
the monitoring phone immediately switches back to monitoring mode.
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
Room monitoring
Scroll to Room monitoring and press the Select softkey.
<Room monitoring
setting>
Room surveillance settings:
1. Scroll to Mode, select the room monitoring mode you want and
press the Select softkey.
2. Scroll to Sensitivity, select the level you want and press the Select
softkey.
3. Scroll to Activation delay, select the destination you want and press
the Select softkey.
4. Scroll to Destination number, enter the destination number and
press the Save softkey.
Note:
Test call destination > Select allows you to test the phone number you
have entered to make sure it is correct.
Enable room monitor-
ing
Activating room monitoring:
Scroll to Enable room monitoring and press the Select softkey.
➔You hear the acknowledgement tone and the display shows the
destination number after 10 seconds. The symbol shows when
the microphone for room monitoring is activated.
Reset
To deactive room monitoring:
Press the Reset softkey.
Or:
Press Menu > Activated features > Reset.
➔Room monitoring is now deactivated.

Mitel 622 DECT Specifications

General

Brand	Mitel
Model	622 DECT
Category	Cordless Telephone
Language	English