Mitel 622 DECT User Manual

Dialling and phoning
Mitel 622 DECT Phone 25
eud-1720/1.0 – R3.0 – 08.2015
Using a headset
To make a phone call with the headset.
If you answer a call in headset mode using the Call key or Loudspeaker key, the call is
provided on the headset.
Note:
If you loose the radio contact with a Bluetooth headset, you can go back into the radio
area without being disconnected from the active connection.
Your phone is ringing. To answer the call, proceed as follows:
Press the Call key or Loudspeaker key.
➔The call is provided on your headset.
Press the Loudspeaker key.
➔The phone’s microphone is switched on and the headset microphone
is switched off.
Headset <--> Handset
You can use the Headset or Handset softkey to switch modes.
Ending a call:
Press the End key.
Notes:
• To find out how to activate the headset, refer to the chapter
"To acti-
vate headset mode", page 79.
• To find out how to connect a Bluetooth headset, refer to chapter
"Acti-
vating Bluetooth mode and Bluetooth devices", page 80.
• To call a user, select the user’s phone number and press the Call key
or Loudspeaker key.
• For more information refer to your headset’s user’s guide.

Mitel 622 DECT Specifications

General

Brand	Mitel
Model	622 DECT
Category	Cordless Telephone
Language	English