Mitel 622 DECT User Manual

Personalizing your phone
Mitel 622 DECT Phone 75
eud-1720/1.0 – R3.0 – 08.2015
Display settings
This section explains how to set display properties.
Setting the display
You want to optimise the display settings.
You can activate or deactivate the following settings:
• Font: Font size
• Color scheme
• Backlight
– Brightness: Display brightness.
– Idle timeout: Amount of time the keypad and display backlight remain switched on
after you press a key.
– Charging unit timeout: Amount of time the keypad and display backlight remain
switched on when the cordless phone is placed in the charging unit.
– Backlight during call: Switch on the function to ensure the display remains lit for the
entire duration of a call.
Note:
If you do not switch on the Backlight during call setting, the keypad and display backlight
is switched off automatically 10 seconds after the call is set up. If you receive another call
or an alarm, the backlight is switched back on again for 10 seconds in each case.
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
Display
Scroll to Display and press the Select softkey.
<Display setting>
Scroll to the display setting you want and press the Select softkey.
<Display setting>
Select the display setting you want.
Note:
The Select softkey displays the colour scheme you want.
➔The setting is stored.

Mitel 622 DECT Specifications

General

Brand	Mitel
Model	622 DECT
Category	Cordless Telephone
Language	English