Mitel 622 DECT User Manual

80 Mitel 622 DECT Phone
eud-1720/1.0 – R3.0 – 08.2015
Personalizing your phone
Activating Bluetooth mode and Bluetooth devices
You want to make and receive phone calls with a Bluetooth-supported headset.
You can activate Bluetooth devices as soon as you have activated the Bluetooth mode.
You can activate or deactivate the Bluetooth manually.
Notes:
• Only one Bluetooth connection at a time is possible.
• To find out how to make phone calls with the headset, refer to the chapter "Using a
headset", page
25.
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
Bluetooth
Scroll to Bluetooth and press the Select softkey.
Enable Bluetooth
Activating/deactivating Bluetooth mode:
Scroll to Enable Bluetooth and press the Select softkey.
➔The setting is stored, is displayed.
Or:
The Bluetooth-mode is also available via the service menu: Press key 5
and hold it down for a moment, Activate Bluetooth.
Note:
An activated Bluetooth mode does not imply that a Bluetooth connection
is running.
Subscribe headset
Pair new device:
Scroll to Subscribe headset and press the Select softkey.
Switch on the device you want and set to subscribe mode. Select the
device you want and enter the Bluetooth device PIN.
➔Device is paired, is displayed.
Select headset
List of paired devices:
Switch on the device you want, scroll to Select headset, press the Select
softkey and select a device from the list.
➔The list of coupled devices is displayed.
Note:
The list is limited to 2 Bluetooth devices. Remove a device before you
connect another one.
Delete
Remove device:
Scroll to Select headset and press the Select softkey.
Select the device you want and press the Delete softkey.
➔Device was removed.

Mitel 622 DECT Specifications

General

Brand	Mitel
Model	622 DECT
Category	Cordless Telephone
Language	English