Mitel 622 DECT User Manual

Supplementary features
Mitel 622 DECT Phone 65
eud-1720/1.0 – R3.0 – 08.2015
Hotline
The hotline is typically used for lift phones, emergency phones, or for baby alarms or hot-
line in the accommodation/hotel branch.
A user needs help and picks up the handset or presses the loudspeaker key. The user is
automatically routed to the preconfigured hotline destination number stored in the com-
munication server. The person responsible answers the call and is connected with the
user seeking help.
Alarm cancellation delay: Your system administrator can set a delay (0-60 seconds,
depending on the Mitel system phone). During this delay the user can enter another call
number in order not to trigger a call on the hotline destination number. If the user does not
dial another phone number during this predefined time or puts the handset back down
again, a connection with the Hotline number is automatically set up. Contact your system
administrator for more information.
User needs help:
User picks up the handset of his phone or presses the loudspeaker key.
➔A connection with the hotline number is automatically set up after a
predefined time without the user having to do anything else.
Note:
The hotline is integrated in your communication system. Information on hotline alarm with
Mitel Alarm Server can be found in the chapter "Hotline Alarm", page 68.

Mitel 622 DECT Specifications

General

Brand	Mitel
Model	622 DECT
Category	Cordless Telephone
Language	English