Keys, display, and menu guidance
Mitel 6930 SIP 19
eud-1764/2.1 – R6.0 – 10.2018
The key configuration is not made directly on the phone. Available settings
for the key configuration:
• MiVoice Office 400 communication system: The configuration is
made by your system administrator in the communication system.
• Self Service Portal: You can use the Self Service Portal (see chapter
"
MiVoice Office 400 Self Service Portal", page 9) where you can config-
ure, change, or delete the keys.
For information about freely configurable keys, see the chapter "Configur-
ing keys", page 93.
Note: A key that you have configured locally on your phone can not be displayed
or overwritten in the Self Service Portal. Therefore, always configure your
keys using the Self Service Portal of the MiVoice Office 400 communica-
tion server.
Function key configuration (default key setting) -
Overview
The phone on the MiVoice Office 400 communication system is delivered
with the default function key configurations summarized in the following
table. Note that your system administrator might change the default config-
uration and your phone configuration might therefore differ from the default
configuration.
Function key Mitel 6930 SIP Mitel 6930 SIP if defined as free seating
phone
Key T1 Personal Line 1 Personal Line 1
Key T2 Personal Line 2 Personal Line 2
Key T3-T44 Empty Empty
Key S1 System menu System menu
Key S2 Call forwarding menu Free seating: Log in/Log out
Key S3 Take (pick up own call) Request a callback
Key S4 Call routing menu Empty
Key S5 Empty Empty
Key S6 Phone lock on/off Empty
Key S7 Request a callback Empty
Key S8-S24 Empty Empty
To Next Page
Loading...
