38 Mitel 6930 SIP
eud-1764/2.1 – R6.0 – 10.2018
Phoning
Dialing with a configurable key/ busy lamp field
You want to call someone whose phone number is stored under a configu-
rable key or a busy lamp field.
To find out how to configure a configurable key, refer to chapter "Configur-
ing keys", page 93.
Dialing with the line key
You can make a call through a line key.
Your phone is equipped with two dedicated line keys with LED (two top
softkeys configured as line keys).
Your system administrator can set up to ten additional line keys (twelve in
total). The actual number of line keys depends on the system configura-
tion. Press a set line key directly or select a line by using the horizontal
right navigation key. The display shows the dialed line number (L1, L2
etc.). If a line is free, then the New Call softkey at the bottom left of the dis-
play can be used.
Line keys are stored on configurable keys by your system administrator
(see chapter "
Line keys on a key telephone", page 76).
Phoning with the handset:
1. Pick up the handset.
2. Press the desired configurable key/busy lamp field.
➔The phone number is dialed.
Using your phone in hands-free mode:
Press the desired configurable key/busy lamp field.
➔The phone number is dialed.
Dialing with the line key:
Enter the phone number.
Press a free line key.
➔The phone number is dialed. The LED on the line key lights up.
To Next Page
Loading...
