58 Mitel 6930 SIP
eud-1764/2.1 – R6.0 – 10.2018
Phoning
• As long as you do not have your own phone or are not logged on to a
Free Seating phone, your caller will obtain either the busy signal or be
forwarded to a preconfigured destination, depending on the system
configuration.
• The call list display type Picture ID (see chapter "
Editing options for the
call list", page 69) is not available for free seating phones.
Hotline
The hotline is typically used for lift phones, emergency phones, or for baby
alarms or hotline in the hospitality/hotel branch.
A user requires help and picks up the handset or presses the loud-
speaker/headset key. The user is automatically routed to the preconfig-
ured hotline destination number stored in the MiVoice Office 400 commu-
nication system. The person responsible answers the call and is con-
nected with the user seeking help.
Alarm cancellation delay: Your system administrator can set a delay (1-
60 seconds, depending on the Mitel system phone). During this delay the
user can enter another call number in order not to trigger a call on the
hotline destination number. If the user does not dial another phone number
Log in free seating:
Press the Free Seating: Log in/out softkey.
Enter phone number and PIN and confirm with the OK softkey.
➔You are now logged in and can use the free seating phone with your personal
settings.
Note: The default PIN setting ‘0000’ is not accepted (for more information on the PIN,
see chapter "
Changing the PIN", page 86).
Log out free seating:
1. Press the Free Seating: Log in/out softkey.
➔The display with the call number is displayed.
2. Depending on the system configuration, enter the PIN and confirm with the
OK softkey.
➔You are now logged off; the free seating phone is now available again to
other users.
Note: You are automatically logged off if your system administrator has set up an auto-
matic log off process.
To Next Page
Loading...
