82 Mitel 6930 SIP
eud-1764/2.1 – R6.0 – 10.2018
Personalizing your phone
Handset volume: You need to set the volume of handset and loudspeaker
separately. The new handset volume will remain saved even after the call
is ended.
Setting the ringing properties
You want to change the way in which your phone rings.
Available settings:
Note: • A list of alarm melodies is available for playback: Menu > Alarm melo-
dies > Test.
• You can configure individual ring tones for each busy lamp field and line
key using the Self Service Portal. For more information about the Self
Service Portal, please refer to "MiVoice Office 400 Self Service Portal",
page 9.
Adjusting the volume (in idle state, during ringing phase/call):
Quieter: Press the key.
Louder: Press the key.
Ring tones Description
• Ring tone 1...15 Selection of available ring melodies.
• Silent If you do not want to be disturbed during a certain time,
you can set your phone not to ring with Suppress ring
tone.
Tone set Country-specific ring tone settings. This menu is set by
your system administrator.
Setting the ring:
Press the Option key.
Scroll to Audio.
Scroll down to Ring Tones using the navigation key and confirm with the selec-
tion key.
Select the setting you want and confirm with the Save softkey.
➔After you selected a ring melody, the melody will be played.
To Next Page
Loading...
