Personalizing your phone
Mitel 6930 SIP 85
eud-1764/2.1 – R6.0 – 10.2018
To change both the local user language and the user language of the
MiVoice Office 400 communication system, configure the language set-
tings for your phone over the Self Service Portal only. For more information
about the Self Service Portal, please refer to "
MiVoice Office 400 Self Ser-
vice Portal", page 9.
The language selection depends on the language packages your system
administrator installed on your phone. English is the default language and
is included in every language package. Should your desired language not
be available, your system administrator can install more language pack-
ages.
If your desired language is available, but is not displayed or displayed only
in parts, you have to restart your phone (see chapter "
Restart phone",
page 88).
Selecting the time and date
The settings for the time and date are made by your system administrator.
The following chapter is thus intended for your system administrator or
technician, who will then set the time and date for you.
As system administrator or technician, you can make global settings for
the time and date for all Mitel SIP phones in the MiVoice Office 400 com-
munication system. If no NTP time server is entered in the communication
system, then you can also make these settings over the phone. Available
settings:
Setting Description
Settings
• Time format 12-hour or 24-hour clock format.
• Daylight savings • List of available summer time formats.
–Off
– 30min summertime
– 1h summertime
– Automatic
• Date format List of available date formats.
Time zone List of available global time zones.
Set Date and Time Set the time and date manually or select Use Network
Time and select the settings for the time server.
• Use network time The settings for the time and date are controlled by the
communication system. The time/date are shown on the
display when in the idle state.
To Next Page
Loading...
