Installation
4.2 Fitting the communication server
The communication server is suitable for both wall and desktop installation as well as for mounting in a 19”
rack. Different mounting sets are available in each case.
4.2.1 Equipment supplied
The equipment supplied with the communication server includes:
• Mitel SMBC communications server with fitted CPU module and mounted fan
• Set of screws for wall or desktop installation and earthing connection
• Snap-on tag
• Power supply
• Power cord
• Product information
4.2.2 Mounting options
Mitel SMBC includes all the materials required for wall or desktop installation. Additional rack installation
sets are required for a 19” rack installation.
For wall mounting all the connecting cables can be concealed behind a cable cover. This set can be
ordered as an option.
4.2.2.1 Cable cover set
Equipment supplied:
• Cable cover
• Left-hand bracket for cable cover
• Right-hand bracket for cable cover
• Screw set
4.2.2.2 Mitel SMBC rack-mounting set
Equipment supplied:
• 2 mounting plates for rack installation
• Screw set
4.2.3 Location requirements
The following location requirements must be observed when positioning the communication server.
Release 7.1
85 System Manual for Mitel SMB Controller
To Next Page
Loading...
Need help?
General
