Mitsubishi Electric A173UHCPU Programming Manual

APPENDICES
APP − 16
(5) System errors (900 to 999)
Table 2.7 System Error List (900 to 999)
Control Mode
Error
Code
Positioning Fixed-Pitch Feed Speed Speed/Position Switching Speed Switching Constant-Speed JOG Manual Pulse Generator Zeroing Position Follow-Up Control OSC
Error Cause
Error
Processing
Corrective Action
900
• When the servo amplifier power is switched
ON, the motor type set in the "system
settings" differs from the motor type actually
installed.
(Checked only when using MR-J2S-B/
MR-J2-B)
• Correct the motor type setting in the
system settings.
901
• When the servo amplifier power is switched
ON, the motor travel value while the power
was OFF is found to have exceeded the
"Power of Allowed Traveling Points" setting
made in the system settings.
Further
operation is
impossible.
• Check the position.
Check the encoder battery.

Mitsubishi Electric A173UHCPU Specifications

General

Brand	Mitsubishi Electric
Model	A173UHCPU
Category	Control Unit
Language	English