Mitsubishi Electric FX5 - Chapter 13 Device;Label Memory Area Setting; Default Capacity of each Area

110
13 DEVICE/LABEL MEMORY AREA SETTING
13.1 Default Capacity of Each Area
13 DEVICE/LABEL MEMORY AREA SETTING
The capacity of each area in device/label memory can be specified.
13.1 Default Capacity of Each Area
The default capacity of each area is as follows.
(1) The capacity of each area can be changed. (Page 112 Device/Label Memory Area Setting)
(2) The number of points of user devices can be changed. (Page 113 Device Setting)
Item Capacity
Device (high speed) Area Capacity 12 K words
Device (standard) Area Capacity 35 K words
Label Area Capacity 12 K words
Latch Label Area Capacity 1 K words
(1)
(2)