Mitsubishi Electric FX5 - PART 2 FUNCTIONS

3 CPU MODULE MEMORY CONFIGURATION
3.2 Files
43
3
3.2 Files
The CPU module files are explained below.
File type and storage destination memory
File types and their storage destination memory are explained below.
: Can be stored, : Cannot be stored
*1 Can be stored but cannot operate as a function.
*2 mmm indicates the module number (3-digit hexadecimal). nn is the serial number (2-digit hexadecimal) for each module.
*3 nn corresponds to the setting number and is 01 through 04.
*4 For serial communications file.
*5 For Ethernet file.
*6 n is 0 through F.
vvvv is the version information. (4-digit decimal)
File type CPU built-in memory SD memory card File name (extension)
Data memory
Drive No.4 Drive No.2
Program Arbitrary.PRG
FB files Arbitrary.PFB
CPU parameters CPU.PRM
System parameters SYSTEM.PRM
Module parameters UNIT.PRM
Module extension parameter (for intelligent
module)
UEXmmmnn.PRM
*2
Memory card parameter MEMCARD.PRM
Device comments Arbitrary.DCM
Device comment backup Arbitrary.DCB
Device initial values Arbitrary.DID
Event history EVENT.LOG
Global label setting file GLBLINF.IFG
Data logging setting file LOGnn.LIS
*3
Memory dump setting file MEMDUMP.DPS
Remote password 00000001.SYP
Module extension parameter (for protocol setting) UEX3FF01.PPR
*4
UEX3FF00.PPR
*5
Firmware update F50nvvvv.SYF
*6
Firmware update prohibited 
*1
FWUPDP.SYU
System file for backing up CPU module data $BKUP_CPU_INF.BSC
Device/label data file for backing up CPU module
data
BKUP_CPU_DEVLAB.BKD
System file for CPU module auto exchange
function
$BKUP_CPU_EXCHANGE.DAT