Mitsubishi Electric MELSEC iQ-R Series - Appendices; Appendix 1 Checking Production Information and Firmware Version; Checking Methods

146
APPX
Appendix 1 Checking Production Information and Firmware Version
APPENDICES
Appendix 1 Checking Production Information and
Firmware Version
Checking methods
This section describes how to check the production information and firmware version of a module.
Checking on the module
■ Rating plate
The rating plate is located on the side of the module.
The production information (16 digits) of the module is shown on the SERIAL field.
■ Production information marking
The production information (16 digits) of the module is printed on the marking on the front (at the bottom) of the module.
(1) Production information (16 digits)
(2) Relevant regulation standards
(3) QR code
(1)
(3)
(2)
123456789ABCDEF
1234567890ABCDEF