APPX
Appendix 4 Differences Between MELSEC iQ-R Series and MELSEC-Q Series
157
A
Appendix 4 Differences Between MELSEC iQ-R
Series and MELSEC-Q Series
This section describes differences between the MELSEC iQ-R series and MELSEC-Q series.
Refer to the following for content not included in this section.
TECHNICAL BULLETIN No.FA-A-0171
Hardware configuration
*1 The GOT that can be used and its connection method differ. ( Connection Manual (Mitsubishi Products) for GOT used)
*2 Use the extended temperature range base unit if using in an operating ambient temperature of 0 to 60.
Function
Item MELSEC iQ-R series MELSEC-Q series
Main base unit Number of slots 5, 8, 10, 12 2, 3, 5, 8, 12
Slim type Not available Available
Extension base unit Number of slots 5, 8, 10, 12 2, 3, 5, 8, 12
Type requiring no power supply module Not available Available
Extension cable Overall cable distance 20m 13.2m
Shortest cable 0.6m (RC06B) 0.45m (QC05B)
Power supply module Life detection power supply module Not available Available
Battery for CPU module Q6BAT, Q7BAT Q6BAT, Q7BAT, Q8BAT
GOT connection
*1
Bus connection not available Bus connection available
Use of MELSEC-AnS/MELSEC-A series products Not available Available
Compatibility to operating ambient temperature 0 to 60 Compatible
*2
Incompatible
Item MELSEC iQ-R series MELSEC-Q series
Application function
(standard function)
MUX(_E) Input value of (n): 0 to 27 Input value of (n): 1 to 28
To Next Page
Loading...
