Mitsubishi Electric MELSEC iQ-R Series - Page 153

5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.2 System to Which Multiple Safety CPUs are Connected
151
5
Communications between Safety CPU and safety and standard remote I/O module
This section describes network parameters setting required for communications between Safety CPU and safety remote I/O
module and standard remote I/O module.
■Required Settings
Set the station type, network number, and parameters of the CC-Link IE Field Network master/local module. Display the
required settings. Then, select and input parameters as shown below. Complete the input. Then, click the [Apply] button in the
lower right of the window.
Window
Displayed items
*1 Station number setting method and parameter setting can be selected by setting "Parameter Editor" and "Program". Here, set the
"Parameter Editor".
Setting classifications Safety programmable
controller (1)
CCIEF master (2-0)
Safety programmable
controller (2)
CCIEF master (3-0)
Safety programmable
controller (3)
CCIEF master (4-0)
Required
Settings
Station Type Master Station Master Station Master Station
Network Number 2 3 4
Setting Method Set parameters
*1
Set parameters
*1
Set parameters
*1
Station number setting 0 0 0
Parameter Setting
Method
Set parameters
*1
Set parameters
*1
Set parameters
*1