Mitsubishi Electric MELSEC iQ-R Series - Page 169

5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.2 System to Which Multiple Safety CPUs are Connected
167
5
• Supplementary cyclic settings
Set link scan mode, station-based block data assurance, and input/output hold clear setting.
Operating procedure
1. Select and input parameters as shown below.
2. Click the [Apply] button and complete "Supplementary Cyclic Settings".
Window
Displayed items
Item Range/value
CCIEF programmable
controller
Master (1-0)
CCIEF programmable
controller
Local (1-1)
CCIEF programmable
controller
Local (1-2)
Link scan mode Sequence scan asynchronous (Unavailable) (Unavailable)
Constant link scan time (Unavailable) (Unavailable) (Unavailable)
Station-based block data assurance Enable (Unavailable) (Unavailable)
Output Hold/Clear Setting during CPU STOP Clear Clear Clear
Data Link Error Station Setting Clear Clear Clear
Output Mode upon CPU Error Clear Clear Clear