Mitsubishi Electric MELSEC iQ-RJ71C24-R4 - Page 552

550
APPENDICES APPENDIX
Appendix 7 When Connecting the Module to a Remote Head Module
4. Click the [OK] button to add the module labels of the CC-Link IE Field Network master/local module.
5. Set the items in "Required Settings" of "Module Parameter" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Module Parameter]  [Required
Settings]
6. Set the network configuration as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Module Parameter]  [Basic Settings]
 [Network Configuration Settings]