Mitsubishi Electric MELSEC-Q Series - Instruction Conversion from Qnascpu to QCPU

7 REPLACEMENT OF PROGRAM
7 - 25
7.2.4 Instruction conversion from QnASCPU to QCPU
The automatic conversion is applied to the instructions of which equivalent functions and instructions
exist in the change target QCPU.
For instructions that are not automatically converted, consider reviewing the program referring to the
inconvertible instructions described in Section 7.2.5.
Re-program for the modules to use with the QCPU, since the specifications of the intelligent function
module instructions differ between QCPU-compatible modules and QnASCPU-compatible modules.
Remarks
When the indirect specification is used, execute the ADRSET instruction.