Mitsubishi Electric MELSEC-Q Series - Page 24

1 INTRODUCTION
1 - 8
(b) 2-slot type (inapplicable to AnS size Q series large type base unit)
*1 The XY address will change because two replacement modules are used. The program must be revised.
Consider using FA goods if not changing the XY address.
*2 Model name of set of 1-slot type conversion adapter ERNT-ASQT64TC and wire breakage detection connector
conversion cable.
A base adapter (ERNT-ASQB3N, ERNT-ASQB6N, ERNT-ASQB5N) is required.
Note that the conversion adapter DIN rail mounting bracket is required when a Q series base unit is mounted on a DIN rail.
*3 For standard control by thermocouple input
*4 For standard control by platinum temperature measuring resistor input
*5 For heating/cooling control by thermocouple input
*6 For heating/cooling control by platinum temperature measuring resistor input
(c) Universal conversion adapter (mountable on the Q series large type base unit (AnS series
size))
A universal conversion adapter includes a conversion adapter and a screw terminal block (screw
size: M3.5).
When the module which does not support the conversion adapter is replaced, the solderless terminal
can be used and rewiring can be reduced. However, the wiring change is required.
*1 All terminal blocks included in the universal conversion adapter are the 20-point terminal block.
*2 The same number of universal conversion adapters as the number of replaced Q series modules is required.
Product
Model
Conversion adapter model
AnS Series Q Series
Input module
A1SX20
QX28 × 2 modules
ERNT-ASQTX20
*1
A1SX20EU
Output module
A1SY60
QY68A × 2 modules
ERNT-ASQTY60
*1
A1SY60E
ERNT-ASQTY60E
*1
Temperature control module with
wire breakage detection
A1S64TCTTBW-S1
Q64TCTTBWN
ERNT-ASQT64TCTTBW
*2
A1S64TCTRTBW
*3
A1S64TCRTBW-S1
Q64TCRTBWN
ERNT-ASQT64TCRTBW
*2
A1S64TCTRTBW
*4
A1S62TCTTBW-S2
Q64TCTTBWN
ERNT-ASQT62TCTTBW
*2
A1S64TCTRTBW
*5
A1S62TCRTBW-S2
Q64TCRTBWN
ERNT-ASQT62TCRTBW
*2
A1S64TCTRTBW
*6
Product
Model
Universal conversion adapter
*1
AnS Series Q Series Model AnS series shape Q series shape
Input A1SX30 QX40
ERNT-
ASQTB20
*2
20-point terminal
block
18-point terminal
block
Output
A1SY14EU QY10
A1SY18A(EU) QY18A
A1SY68A QY68A
I/O combined
A1SX48Y58 QX48Y57
A1SX48Y18 QX40+QY10
18-point terminal
block × 2