Mitsubishi Electric Q172CPU - Page 294

7 - 33
7 MOTION PROGRAMS FOR POSITIONING CONTROL
• For MOD
No. Operation result Data 1 Data 2
28
#n (16 bit)
16-bit data is converted into 32-bit data.
29
#nL, #n:L (32 bit)
No conversion
30
#n (16 bit)
16-bit data is converted into 32-bit
data.
#nF, #n: F (64 bit)
64-bit data is converted into 32-bit data.
Fractional portion is dropped during conversion.
Error occurs if conversion result exceeds 32-bit range.
(Error : 531)
31
#n (16 bit)
16-bit data is converted into 32-bit data.
32
#nL, #n:L (32 bit)
No conversion
33
#nL, #n:L (32 bit)
No conversion
#nF, #n:F (64 bit)
64-bit data is converted into 32-bit data.
Fractional portion is dropped during conversion.
Error occurs if conversion result exceeds 32-bit range.
(Error : 531)
34
#n (16 bit)
16-bit data is converted into 32-bit data.
35
#nL, #n:L (32 bit)
No conversion
36
#nF, #n:F (64 bit)
(64 bit)
Internal operation
result (32 bit) is
converted into 64-
bit data.
#nF, #n:F (64 bit)
64-bit data is converted into 32-bit
data.
Fractional portion is dropped
during conversion.
Error occurs if conversion result
exceeds 32-bit range.
(Error : 531)
#nF, #n:F (64 bit)
64-bit data is converted into 32-bit data.
Fractional portion is dropped during conversion.
Error occurs if conversion result exceeds 32-bit range.
(Error : 531)
n : Indicates variable number or device number