1 - 11
1 OVERVIEW
Servo amplifier
Servomotor
Positioning control parameter . . . . .
System settings
Fixed parameters
Servo parameters
Parameter block
Home position return data
JOG operation data
Limit switch output data
Manual pulse generator
Set and correct using a
peripheral device
(Note-1)
System data such as axis allocations
Fixed data by the mechanical system, etc.
Data by the specifications of the connected
servo amplifier
Data required for the acceleration, deceleration
of the positioning control, etc.
Data required for the home position return
Data required for the JOG operation
ON/OFF pattern data required for the limit
switch output function
REMARK
(Note-1) : The following peripheral devices started by the SW6RN-GSV43P can be
used.
• The personal computer by which WindowsNT
R
4.0/Windows
R
98/
Windows
R
2000/Windows
R
XP works. (IBM PC/AT campatible)
WindowsNT
R
, Windows
R
are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
To Next Page
Loading...
