1 - 22
1 OVERVIEW
(3) Peripheral device configuration for the Q173CPU(N)/Q172CPU(N)
The following (a)(b)(c) can be used.
(a) RS-232 configuration
RS-232 cable
(QC30R2)
Personal computer
Motion CPU module
(Q173CPU(N), Q172CPU(N))
(b) USB configuration
Motion CPU module
(Q173CPU(N), Q172CPU(N))
Personal computer
(Windows 98/2000/XP only)
USB cable
R
(c) SSCNET configuration
Motion CPU module
(Q173CPU(N), Q172CPU(N))
SSC I/F communication cable
(Q170CDCBL M,
Q170BDCBL M)
SSC I/F Card/Board
(A30CD-PCF/A 0BD-PCF)
A30CD-PCF
SSCNET
CARD
MITSUBISHI
Personal computer
(Note) : For information about GPP functions of PLC CPU, refer to the operating
manual of PLC. Also, refer to the help of each software for information about
operation of each programming software package.
To Next Page
Loading...
