9 - 9 9 - 9
MELSEC-Q
9 UTILITY PACKAGE (GX Configurator-SC)
9.3 Utility Package Operation
9.3.1 Operation overview
GX Developer screen
Select a target intelligent function
module screen
See Section 9.3.2
[Tools] – [Intelligent function utility] – [Start]
When auto refresh is set
2) Go to next page
When used via online operation
1) Go to next page
Select [Tools] – [Flash ROM setting] from the menu bar.
When used via offline operation
Select the module type and
module model name.
See Sections 9.4.1 to 9.4.11
The various setting values to be registered in the Q series
C24's
flash ROM can be saved in a file of the personal
computer via offline operation.
Use online operation to write system setting values to the
Q series
C24.
Flash ROM settings screen
See Section 9.4
To each setting screen
POINT
POINT
The following settings must be performed before starting
the intelligent function module utility:
• Set the project using GX Developer
• Set "QCPU (Q mode)" for the PC series.
To Next Page
Loading...
