10 - 21 10 - 21
MELSEC-Q
10 DEDICATED INSTRUCTIONS
10.7 G(P).CPRTCL
Protocols and functional protocols written to the flash ROM with the predefined
protocol support function can be executed.
For details of the functional protocol, refer to Section 10.7.1.
Set
data
Applicable device
Internal device
(System, user)
File register
Link direct device
J \
Intelligent function
module device
U \G
Index register
Zn
Constant Others
Bit Word Bit Word
n1 —
—
—
n2 —
—
—
(S) —
— — —
(D)
— — —
(S) (D)
GP.CPRTCL
G.CPRTCL
G.CPRTCL
GP.CPRTCL
Command
[Executing
condition]
[Instruction code]
Command
Un n1 n2
n1 n2
(S) (D)Un
Set data
Set data Description Set by Data type
Un
Start I/O signal of the module
(00 to FE: Upper 2 digits when I/O signals are expressed in 3-digit.)
User BIN16 bit
n1
Channel to communicate with other devices.
1: Channel 1 (CH1 side)
2: Channel 2 (CH2 side)
User
BIN16-bit
Device name
n2 Number of consecutive protocol executions (1 to 8) User
BIN16-bit
Device name
(S) Start number of the device in which control data are stored. User, system Device name
(D) Bit device number to be turned ON at completion of execution. System Bit
The file register per local device and program cannot be used as the setting data.
To Next Page
Loading...
